Input selection is made using the front panel pushbutton switches, or remotely using the RS-422/RS-485 serial interface. All video inputs and outputs use standard SVHS connectors. The output gain for Y and C and frequency response for the Y component are internally adjustable. Switching occurs during the vertical interval of the output video.
Up to 8 RS-81 series switchers can be slaved together. Combining the RS-81S with the RS-81A creates an 8x1 audio follow video router, complete with breakaway.
Power Requirements | 115 VAC, 60 Hz or 230 VAC, 50 Hz; 3 W |
---|
Number of Inputs | 8 |
---|---|
Input Impedance | 75 ohms, terminating |
Input Signal Level | 1 V p-p nominal, 2 V p-p maximum |
Input Connectors | Standard SVHS x 8 |
DC Offset | +1.4/-0.7 V maximum |
Crosstalk | -60 dB to 4.2 MHz |
---|---|
Path Length Differential | Less than 1 degree @ 3.58 MHz |
Switching Bounce | Less than 2 IEEE units (14 mV) |
Switch Timing | Vertical interval |
Number of Outputs | 1 |
---|---|
Load Impedance | 75 ohms |
Output Level | 1 V p-p nominal, 2 V p-p maximum |
Output Gain Range | +3.5/-0.7 dB |
Output Connector | Standard SVHS |
DC Offset | Less than 50 mV |
Frequency Response | +0/-0.05 dB to 15 MHz, +0/-0.4 dB to 20 MHz |
Differential Gain | Less than 0.1%, 10-90% APL |
Differential Phase | Less than 0.1 deg., 10-90% APL |
Horizontal Tilt | Horizontal Tilt |
Vertical Tilt | Less than 0.3%, composite field square wave |
RS-81S | 8.1 W x 1.9 H x 5.1 D |
---|