TCR-1 SMPTE Time Code Reshaper/Distribution Amplifier
The TCR-1 is a 1 input, 9 output distribution and reshaping
amplifier specifically designed for SMPTE time code.
The TCR-1 takes an incoming LTC (longitudinal time code) signal, and
reshapes the rise and fall times to SMPTE standards. Even extremely
low level input signals are accurately detected. Nine independent
outputs, each with its own adjustable gain control, then deliver
the signal to the various required destinations. The gain controls
for each output are conveniently located on the front panel.
Input and output connections may be XLR, 1/4", or RCA, balanced or
unbalanced, to interconnect readily with most types of equipment.
Additional balanced barrier strip outputs are also provided.
|Power Requirements||115 VAC, 60 Hz or 230 VAC, 50 Hz; 8 W|
|Number of Inputs||1|
|Input Impedance||20 KOhms balanced, 10 kOhms unbalanced|
|Input Signal Level||-35 dBu minimum|
|Input Connectors||XLR-3F, 1/4" TRS, RCA|
|Number of Outputs||9|
|Output Impedance||60 ohms balanced, 30 ohms unbalanced|
|Output Level Range||-20 dBu to +12 dBu|
|Output Signal to Noise Level||-78 dB, 20 Hz to 30 kHz|
|Output Connectors||RCA x 3, 1/4"TRS x 1, XLR-3M x 1, 3-position terminal block x 4|
Physical Dimensions (Inches)
|TCR-1||8.1 W x 1.9 H x 5.1 D|