Ideally suited for near-field monitoring applications, the compact AM-1 has 7 watt ( 16 ohms ) audio power amplification to handle a variety of monitoring needs. Left / Right independent signals, or a mixed signal can be monitored by a front panel speaker.
The AM-1 has XLR balanced inputs with Left / Right independent volume controls.
LED monitoring of audio presence is provided for Left and Right channels, and nominal input level is selectable for either -10dBv or +4 dBu.
A ¼" TRS stereo headphone jack is provided for convenience.
Speaker audio monitoring is possible while the headphone is plugged in through two (L/R) internal bypass presets.
| Power Requirements | 1115 VAC, 60 Hz or 230 VAC, 50 Hz; 30 W |
|---|
| Input Impedance | 20 Kohms balanced, 10 Kohms unbalanced |
|---|---|
| Input Signal Level | -10 dBv +4 dBu (via jumper) |
| Maximum Input Level | +26 dBu |
| Input Connectors | XLR x 2 |
| Power Amplifier | 7 W RMS, 20 Hz to 20 kHz, 16 ohms |
|---|---|
| Speaker Impedance | 16 ohms |
| Frequency Response | 20 Hz to 20 kHz +/-0.1 dB (Headphone Line output ) |
| T.H.D. + Noise | Less than 0.07%, 20 Hz to 20 kHz |
| AM-1 | 8.1 W x 1.9 H x 5.1 D |
|---|
| AM-1 | Stand alone Table Top Version |
| AM-1/R1 | 1 Unit Rack Mounted in 1 RU Frame. Unit takes 1/2 of the rack frame |
| AM-1/R2 | 2 Units Rack Mounted in 1 RU Frame |
| AM-1/A | Assembly unit only. Ordered for existing Frames |
| AM-1/M | Manual |
| PH-3/FR | Phase 3 Rack Frame with no Products Installed |
| PH-3/BF | Phase 3 Blank Front Panel plate |
| PH-3/BR | Phase 3 Blank Rear Panel Plate |
| PH-3/DB | Phase 3 Under the Desk Mounting Bracket |
