Any of the four digitally generated patterns may be keyed over the input video signal. Each pattern identifies the safe action and safe title areas of the picture, in accordance with SMPTE/EBU recommended practice.
The crosshatch area on three of the patterns is useful for picture component positioning and title alignment (see below).
Patterns may be selected using the front panel switches, or via remote inputs. The BG-2 is available for NTSC or PAL/SECAM video standards.
Power Requirements | 115 VAC, 60 Hz or 230 VAC, 50 Hz; 10 W |
---|
Number of Inputs | 1, bridging (BNC x 2) |
---|---|
Input Impedance | 15 kohms |
Input Return Loss | Greater than 40 dB to 5 MHz |
Input Level | 1 V p-p |
Number of Outputs | 2 (BNC x 2) |
---|---|
Output Impedance | 75 ohms, 1% |
Output Level | 1 V p-p |
BG-2 | 8.1 W x 1.9 H x 5.1 D |
---|
BG-2 | Stand alone Table Top Version |
BG-2/R1 | 1 Unit Rack Mounted in 1 RU Frame. Unit takes 1/2 of the rack frame |
BG-2/R2 | 2 Units Rack Mounted in 1 RU Frame |
BG-2/A | Assembly unit only. Ordered for existing Frames |
BG-2/M | Manual |
PH-3/FR | Phase 3 Rack Frame with no Products Installed |
PH-3/BF | Phase 3 Blank Front Panel plate |
PH-3/BR | Phase 3 Blank Rear Panel Plate |
PH-3/DB | Phase 3 Under the Desk Mounting Bracket |