FC-2 Digital Audio Format Converter
The FC-2 is a dual digital format converter for professional applications.
The half rack package contains two fully indepedent format converters. Each
may be configured either for S/PDIF to AES3 conversion, or for AES3 to S/PDIF
conversion.
The front panel MODE LED displays the conversion mode (ON: AES3 to S/PDIF,
OFF: S/PDIF to AES3). If the wrong digital audio input type is connected,
the MODE LED will flash.
The incoming digital sampling rate for each channel (32 kHz, 44.1 kHz, or 48
kHz) is displayed on the front panel LEDs, providing signal verification.
Under Construction
FC-2 Specifcations
| Power Requirements | 115 VAC, 60 Hz or 230 VAC 50 Hz, 10W |
|---|
AES/EBU Digital Audio Inputs
| Number of Inputs | 1 per channel, 2 total |
|---|
| Input Connector | XLR-3F |
|---|
| Input Impedance | 110 Ohms, transformer coupled |
|---|
| Input Cable Length | 300 meters maximum |
|---|
S/PDIF Digital Audio Inputs
| Number of Inputs | 1 per channel, 2 total |
|---|
| Input Connector | RCA |
|---|
| Input Impedance | 75 Ohms |
|---|
| Input Cable Length | 75 meters maximum |
|---|
AES/EBU Digital Audio Outputs
| Number of Outputs | 1 per channel, 2 total |
|---|
Ordering Information
| FC-2 | Stand alone Table Top Version |
| FC-2/R1 | 1 Unit Rack Mounted in 1 RU Frame. Unit takes 1/2 of the rack frame |
| FC-2/R2 | 2 Units Rack Mounted in 1 RU Frame |
| FC-2/A | Assembly unit only. Ordered for existing Frames |
| FC-2/M | Manual |
| PH-3/FR | Phase 3 Rack Frame with no Products Installed |
| PH-3/BF | Phase 3 Blank Front Panel plate |
| PH-3/BR | Phase 3 Blank Rear Panel Plate |
| PH-3/DB | Phase 3 Under the Desk Mounting Bracket |
Please note that the Phase 3 products may be order in combination with other units. Example A2D-1/D2A-1 is a Rack Frame with one A2D-1 and one D2A-1 together on the same frame.
