Ideally suited for near-field applications, the compact MA-210 has enough power to handle a variety of monitoring needs.
The MA-210 has 1/4" TRS balanced inputs, and will accept unbalanced inputs. A mono signal applied to the right input is normalled to both output channels. The input level is selectable to -10, 0, or +8 dB.
Front panel clip LEDs warn of signal overload for each channel.
Independent volume controls are provided for the left and right channels, or a single control may be used for both left and right by pressing the follow switch.
Power Requirements | 115 VAC, 60 Hz or 230 VAC, 50 Hz; 30 W |
---|
Input Impedance | 40 kohms balanced, 20 kohms unbalanced |
---|---|
Input Signal Level | -10 dBV/0 dBm/+8 dBm (via jumper) |
Maximum Input Level | +26 dBm |
Input Connectors | 1/4" TRS x 2 |
Common Mode Rejection | -86 dB @ 60 Hz |
Power (continuous, 8 ohms) | 8 W RMS/channel, both channels driven, 20 Hz to 20 kHz |
---|---|
Speaker Impedance | 8 ohms |
Output Connectors | Screw clamp terminal blocks |
Frequency Response | 20 Hz to 20 kHz +/-0.1 dB at rated output |
T.H.D. + Noise | Less than .05%, 20 Hz to 30 kHz at rated output |
Hum and Noise | 98 dB below rated output, 20 Hz to 30 kHz |
Clipping Indicator | Illuminates 2 dB before clipping occurs |
MA-210 | 8.1 W x 1.9 H x 5.1 D |
---|
MA-210 | Stand alone Table Top Version |
MA-210/R1 | 1 Unit Rack Mounted in 1 RU Frame. Unit takes 1/2 of the rack frame |
MA-210/R2 | 2 Units Rack Mounted in 1 RU Frame |
MA-210/A | Assembly unit only. Ordered for existing Frames |
MA-210/M | Manual |
PH-3/FR | Phase 3 Rack Frame with no Products Installed |
PH-3/BF | Phase 3 Blank Front Panel plate |
PH-3/BR | Phase 3 Blank Rear Panel Plate |
PH-3/DB | Phase 3 Under the Desk Mounting Bracket |