Each channel features two independently adjustable outputs, both variable over the full range of the device. The four individual output level controls are conveniently located on the front panel, along with the master gain controls for the two channels.
Each MP-2 channel provides a gain range of 25 to 60 dB. Clip indicators warn of signal overload 4 dB before clipping actually occurs. Phantom power is individually controlled for each channel.
The microphone inputs are XLR connectors, and audio outputs are screw clamp terminal blocks. All inputs and outputs are balanced.
| Power Requirements | 115 VAC, 60 Hz or 230 VAC, 50 Hz; 11 W |
|---|
| Input Impedance | 9 kohms balanced |
|---|---|
| Input Signal Level | 0 dBm maximum |
| Input Connectors | XLR, female (x2) |
| Common Mode Rejection | -85 dB @ 60 Hz |
| Input Gain Range | +25 dB to +60 dB |
| Clipping Indicators | Illuminate 4 dB before clipping occurs |
| Number of Outputs | 2 per channel, 2 channels total |
|---|---|
| Output Impedance | 60 ohms balanced |
| Output Level | +26 dBm maximum |
| Output Level Range | Variable, zero to full output |
| Output Connectors | Screw clamp terminal blocks |
| Frequency Response | 20 Hz to 20 kHz +/-0.1 dB |
| T. H. D. + Noise | Less than .04%, 20 Hz to 30 kHz, all gain settings |
| Hum and Noise | -121 dB below max. output (-95 dBm), 20 Hz to 30 kHz |
| Crosstalk | -90 dB @ 20 kHz |
| MP-2 | 8.1 W x 1.9 H x 5.1 D |
|---|
