Either the front panel pushbuttons or the rear panel remote control inputs may be used to turn each of the individual channels on and off. The remote inputs require only a simple momentary switch or relay closure to ground to enable or disable a channel.
Each channel has a dedicated front panel gain control.
All active inputs are summed to a common output. All inputs and outputs are balanced, and connections are made via screw-clamp terminal blocks.
The internal expansion buss allows two MX-6 units to be rackmounted and internally connected to form a 12 channel mixer in a single rackspace.
| Power Requirements | 115 VAC, 60 Hz or 230 VAC, 50 Hz; 10 W |
|---|
| Input Levels | +8 dBu nominal, +22 dBu max. |
|---|---|
| Input Gain Range | Off (full mute) to +10 d |
| Input Connectors | Screw clamp terminal blocks |
| Number of Inputs | 6 |
| Input Impedance | 40 kohms, balanced |
| Output Levels | +8 dBu nominal, +22 dBu max. |
|---|---|
| Number of Outputs | 2, parallel |
| Output Connectors | Screw clamp terminal blocks |
| Output Impedance | 60 ohms, balanced |
| Hum and Noise | -75 dBu, all channels maximum gain |
| Frequency Response | +0/-0.2 dB, 20 Hz to 20 kHz |
| Off Isolation | -70 dB, 20 Hz to 20 kHz |
| Peak Indicator | Illuminates approx. 10 dB before maximum output |
