Input selections may be made using the front panel switches, or remotely via RS-422 using the rear panel remote connector.
All audio inputs and outputs use screw clamp barriers.
| Power | 120/230 VAC, 50/60 Hz, 5 W |
|---|
| Number of Inputs | 4 per channel, 2 channels total |
|---|---|
| Input Impedance | 57 Kohms balanced |
| Input Signal Level | +8 dBm nominal, +24 dBm Maximum |
| Connectors | Screw clamp terminal blocks |
| Common Mode Rejection | -85dB @ 20 kHz |
| Number of Outputs | 4 per channel, 2 channels total |
|---|---|
| Output Impedance | 60 Ohms |
| Output Signal Level | +8 dBm nominal, +24 dBm Maximum |
| Output Gain Range | -4 dB/+3 dB |
| Connectors | Screw clamp terminal block |
| DC Offset | Less than 20 mV |
| Frequency Response | 20 Hz to 30 kHz +/-0.1 dB |
| T.H.D. + Noise | Less than .015%, 20 Hz to 30 kHz, nominal output |
| Hum and Noise | -90 dBm, 20 Hz to 30 kHz, nominal output |
| Crosstalk | -70 dB typical @ 18 kHz |
