Either the pushbuttons on the front panel or the remote inputs may be used to select which of the four stereo inputs is routed tot he output.
The rear panel remote connector allows simple switch or relay closures to be used for input selection. This provides numerous options for input selection, including remote switches, slaving to thew RS-41V or RS-41S for audio follow video applications (complete with breakaway), or fully automated audio switching using an external controlling device with relay closures.
All inputs and output are balanced analog. The gain of each output channel is adjustable from -4 dB to +3 dB.
| Power | 120/230 VAC, 50/60 Hz, 5 W |
|---|
| Number of Inputs | 4 per channel, 2 channels total |
|---|---|
| Input Impedance | 57 Kohms balanced |
| Input Signal Level | +8 dBm nominal, +24 dBm Maximum |
| Connectors | Screw clamp terminal blocks |
| Common Mode Rejection | -85dB @ 20 kHz |
| Number of Outputs | 1 per channel, 2 channels total |
|---|---|
| Output Impedance | 60 Ohms balanced |
| Output Signal Level | +8 dBm nominal, +24 dBm Maximum |
| Output Gain Range | -4dB/+3dB |
| Connectors | Screw clamp terminal blocks |
| DC Offset | Less than 20mV |
| Frequency Response | 20 Hz to 30 kHz +/-0.1 dB |
| T.H.D. + Noise | Less than .015%, 20Hz to 30 kHz |
| Hum and Noise | -90 dBm, 20 Hz to 30 kHz |
| Crosstalk | -100dB @ 20 kHz |
| RS-41A | 8.1 W x 1.9 H x 5.1 D |
|---|
