The VDA-SDI is a 1 input, 8 output distribution amplifier specifically designed for serial digital
SDI (4:2:2 component) video signals. The signal present at the input will be reproduced at each of
the 8 outputs.
The reclocking input circuitary provides reduced jitter at the outputs. Input and output cable
lengths may be up to 300 meters.
Input and output connectors are the BNC type.
SDI DA Specifications
Power | 115 VAC, 60 Hz or 230 VAC, 50 Hz |
---|---|
Power Rails | +5 VDC, 0.25A |
Standards | SMPTE: 259M-A (143Mb/s, NTSC) |
---|---|
SMPTE: 259M-B (177Mb/s, PAL) | |
SMPTE: 259M-C (270Mb/s, 4:2:2 Component) | |
SMPTE: 259M-D (360Mb/s, 4:2:2 Component) | |
Connectors | BNC |
Input Impedance | 75 Ohms |
Input Return Loss | 18 dB to clock frequency |
Signal Level | 800 mV +/- 10% |
Equalization | Automatic; >30dB for SMPTE 259M-C (equal to 300m of Belden 8281 Coaxial Cable) |
Number of Outputs | 8 |
---|---|
Standards | SMPTE: 259M-A (143Mb/s, NTSC) |
SMPTE: 259M-B (177Mb/s, PAL) | |
SMPTE: 259M-C (270Mb/s, 4:2:2 Component) | |
SMPTE: 259M-D (360Mb/s, 4:2:2 Component) | |
Connectors | BNC |
Impedance | 75 Ohms |
Return Loss | >18dB to Clock Frequency |
Signal Level | 800 mV +/- 10% |
Rise and Fall Time | 650 pS (20 to 80% amplitude) |