ADA-210/ADA-210A Audio Distribution Amplifier
The ADA-210 and ADA-210A are two channel, 1 input by 10 output audio distribution amplifiers for analog audio signals.
On the ADA-210, a gain control is provided for each of the two channels. All ten outputs for each
channel are adjusted simultaneously. On the ADA-210A, a gain control is provided for each
individual output. Gain controls for both models are easily accessible from the front panel.
Each unit occupies a single EIA rack unit of space, and can function as two independent 1x10
distribution amplifiers, a 1x20 mono distribution amplifier, or as a stereo 1x10 audio distribution
system.
All inputs and outputs are balanced, and the outputs feature short circuit protection.
All connections to the ADA-210 and ADA-210A are made on the rear panel of the unit. The rear
panel configuration is shown below.
ADA-210 Specifications
Power Requirements | 115 VAC, 60 Hz or 230 VAC, 50 Hz; 12W |
Audio Inputs
Input Impedance | 30 kohms balanced |
Input Signal Level | +8 dBm nominal, +24 dBm maximum |
Input Connectors | Screw clamp terminal blocks |
Common Mode Rejection | -60 dB @ 60 Hz |
Audio Outputs
Number of Outputs | 10 per channel, 2 channels total |
Output Impedance | 50 ohms balanced |
Output Level | +8 dBm nominal, +24 dBm maximum |
Output Gain Range | +/- 6 dB |
Output Connectors | Screw clamp terminal blocks |
DC Offset | Less than 20 mV |
Frequency Response | 20 Hz to 30 kHz +/-0.1 dB |
Total Harmonic Distortion | .015%, 20 Hz to 30 kHz, nominal output |
Hum and Noise | -88 dBm, 20 Hz to 30 kHz |
Crosstalk | -100 dB @ 20 kHz |
Physical Dimensions (Inches)
ADA-210 | 19 W x 1.75 H x 7 D, EIA rack mounting |
ADA-210A Specifications
Power Requirements | 115 VAC, 60 Hz or 230 VAC, 50 Hz; 12 W |
Audio Inputs
Input Impedance | 20 kohms balanced |
Input Signal Level | +8 dBm nominal, +26 dBm maximum |
Input Connectors | Screw clamp terminal blocks |
Common Mode Rejection | -80 dB @ 60 Hz |
Audio Outputs
Number of Outputs | 10 per channel, 2 channels total |
Output Impedance | 60 ohms balanced |
Output Level | +8 dBm nominal, +26 dBm maximum |
Output Gain Range | -6 dB/+18 dB |
Output Connectors | Screw clamp terminal blocks |
DC Offset | Less than 20 mV |
Frequency Response | 20 Hz to 30 kHz +/-0.1 dB |
Total Harmonic Distortion | .015%, 20 Hz to 30 kHz, nominal output |
Hum and Noise | -90 dBm, 20 Hz to 30 kHz |
Crosstalk | -110 dB @ 20 kHz |
Physical Dimensions (Inches)
ADA-210 | 19 W x 1.75 H x 7 D, EIA rack mounting |
ADA-210A | 19 W x 1.75 H x 7 D, EIA rack mounting |