AM-4 Audio Monitor
AM-4 Manual
The AM-4 audio monitoring system provides 4 balanced analog inputs and outputs, 2 digital AES3 inputs
and outputs (optional), and an SDI digital video input and output (optional). The inputs are
selectively routed in stereo pairs to the outputs. A/D and D/A conversion is automatically performed
as part of the routing process.
AES3 digital inputs feature automatic sample rate conversion for the inputs up to 96 kHz. Digital
AES3 outputs are fixed at 48 kHz. The SDI digital input demultiplexes the embedded audio, and
supports all four SDI groups.
Left or right channel only and mono modes are provided. Status indicators notify of signal phase
errors, 25 Hz and 35 Hz control tone presence, and silence conditions.
High resolution meters, quality speakers, and headphone output are also provided.
AM-4 Specifications
Power Requirements | 115 VAC, 60 Hz or 230 VAC, 50 Hz |
Analog Audio Inputs and Outputs
Input Impedance | 40 Kohms balanced, 20 Kohms unbalanced |
Input Connectors | XLR-3F and 1/4" TRS, x 4 |
Common Mode Rejection | -60 dB @ 60 Hz |
Output Impedance | 66 Ohms balanced |
Output Connectors | XLR-3M x 4 |
AES/EBU (AES3) Digital Audio Inputs and Outputs (optional)
Input Impedance | 110 Ohms, transformer coupled |
Input Connectors | XLR-3F x 2 |
Input Cable Length | maximum 300 meters |
Output Impedance | XLR-3M, 110 Ohms, transformer coupled, 2 total |
Output Connectors | XLR-3M x 2 |
Output Cable Length | maximum 200 meters |
SDI Serial Video Input and Outputs (optional)
Input and Output Connections | BNC, 75 Ohms, 1 input, 2 active output loops |
Standards | SMPTE: 259M-A (143 Mb/s, NTSC) |
| 259M-B (177 Mb/s, PAL) |
| 259M-C (270 Mb/s, 4:2:2 component) |
| 259M-D (360 Mb/s, 4:2:2, component) |
Equalization | Automatic;30 dB for SMPTE 259M-C (equal to 300m of Belden 8281 coaxial cable) |
Amplifier
Power Output | 15 Watts RMS per channel into 8 Ohms |
Frequency Response | 20 Hz to 20 kHz +/- 1 dB |
THD + Noise | 0.1% or less, full bandwidth |
Hum and Noise | -70 dBu |
Remote Control | DB-9F; parallel remote (pull down to ground) |
Physical Dimensions (Inches)
AM-4 | 19 W x 3.5 H x 12 D inches, EIA rack mounting |