Any of the 4 inputs may be connected to any of the 4 outputs under local pushbutton control, via RS-232/RS-422 serial commands, or by using the remote control switch connections. Remote control panels are also available.
The switcher features automatic cable equalization and data/clock recovery for all video inputs, the capability to drive up to 300m of coaxial cable from any output, and a composite reference video input.
The system is housed in a 1 rack unit (1 RU) enclosure.
| Power | 115 VAC, 60 Hz or 230 VAC 50 Hz, 25W |
|---|
| Number of Inputs | 4 |
|---|---|
| Standards | SMPTE: 259M-A (143Mb/s, NTSC) |
| SMPTE: 259M-B (177Mb/s, PAL) | |
| SMPTE: 259M-C (270Mb/s, 4:2:2 Component) | |
| SMPTE: 259M-D (360Mb/s, 4:2:2 Component) | |
| Connectors | BNC |
| Input Impedance | 75 Ohms |
| Input Return Loss | > 18 dB to clock frequency |
| Signal Level | 800 mV +/- 10% |
| Equalization | Automatic; >30dB for SMPTE 259M-C (equal to 300m of Belden 8281 Coaxial Cable) |
| Composite Analog Video Input | BNC connector, 75 Ohms Bridging, 1 Vp-p nominal level |
|---|
| Number of Outputs | 4 |
|---|---|
| Standards | SMPTE: 259M-A (143Mb/s, NTSC) |
| SMPTE: 259M-B (177Mb/s, PAL) | |
| SMPTE: 259M-C (270Mb/s, 4:2:2 Component) | |
| SMPTE: 259M-D (360Mb/s, 4:2:2 Component) | |
| Connectors | BNC |
| Impedance | 75 Ohms |
| Return Loss | > 18dB to Clock Frequency |
| Signal Level | 800 mV +/- 10% |
| Rise and Fall Time | 650 pS (20 to 80% amplitude) |
| RCP-4 | 19" W x 1.75" H x D |
|---|
