RS-88A 8X8 Mono or 4X4 Stereo Analog Audio Switcher
RS-88A audio routing systems are available for mono or stereo analog signals, and occupy 2 rack spaces. The mono version provides 8 mono inputs and 8 mono outputs. The stereo version provides 4 stereo inputs and 4 stereo outputs.
All audio connections are balanced, and use locking 3-pin XLR connectors.
Any input may be connected to any output under local or remote control. The RS-88A system is available with front panel pushbutton controls, remote control panels, or both. An external system may also control the RS-88A serially (RS-422 or RS-232).
Specify either RS-88A (Mono) or RS-88A (Stereo) when ordering.
RS-88A Specifications
Power Requirements | 115 VAC, 60 Hz or 230 VAC, 50 Hz; 15W |
Analog Audio Inputs
Number of Inputs | 8 mono or 4 Stereo (Left/Right) inputs, 8 total |
Input Connectors | XLR-3F, x8 |
Input Impedance | 40 kohms balanced |
Common Mode Rejection | -68 dB typical @ 60 Hz |
Input Signal Level | +8 dBu nominal, +24 dBu maximum |
Input Gain Range | Unity (0 dB) typical, adjustable to +/-3 dB |
Analog Audio Outputs
Number of Outputs | 8 Mono or 4 Stereo (Left/Right) outputs, 8 total |
Output Connectors | XLR-3M, x8 |
Output Impedance | 100 ohms balanced |
Frequency Response | +/-0.25 dB, 20 Hz to 20 kHz |
Crosstalk | -70 dB typical @ 18 kHz |
Hum and Noise | -75 dBm, 20 Hz to 22 kHz |
THD + Noise | Less than 0.08%, 20 Hz to 20 kHz |
Serial Control
Control Type | RS-422 or RS-232, DB-9F D-connector x2 |
Number of Ports | 2 |
Physical Dimensions (Inches)
RS-88A Switcher (Mono 8x8 or Stereo 4x4) | 19 W x 3.5 H x 6.75 D, EIA rack mounting |
RS-88, RCP-44A (Remote Control Panels)A | 19 W x 3.5 H x 6 D, EIA rack mounting |