S-102A 10X1 Analog Dual Audio
S-102A Manual PDF File 765 KB
The S-102A is a low cost 10 input, 1 output stereo audio routing system. The unit occupies a single
rack space.
Audio input selections may made either from the front panel, or remotely using the
RS-422/RS-232 serial port. An optional remote control panel which duplicates the front panel
controls (except for the level controls) is also available.
Front panel gain controls are provided for each input and for each output. All inputs and outputs
are balanced. Two individually buffered outputs are available from each of the two output
channels. The rear panel audio connectors are screw-clamp terminal blocks for simple, secure
connections.
S-102A Specifications
Power Requirements | 115 VAC, 60 Hz or 230 VAC, 50 Hz; 10W |
Audio Inputs
Number of Inputs | 10 stereo (L, R), 20 total |
Input Impedance | 20 kohms balanced |
Input Signal Level | +8 dBu nominal, +24 dBu maximum |
Input Gain Range | +/- 10 dB |
Input Connectors | Screw clamp terminal blocks |
Common Mode Rejection | -60 dB typical @ 60 Hz |
Audio Outputs
Number of Outputs | 2 per channel, 2 channels (L, R) |
Output Impedance | 60 ohms balanced |
Output Level | +8 dBu nominal, +24 dBu maximum |
Output Gain Range | +/- 6 dB |
Output Connectors | Screw clamp terminal blocks |
DC Offset | Less than 20 mV |
Frequency Response | +0/-0.2 dB, 20 Hz to 20 kHz |
THD + Noise | Less than 0.08%, 20 Hz to 20 kHz, nominal output |
Hum and Noise | -80 dBm, 20 Hz to 30 kHz |
Crosstalk | -80 dB @ 20 kHz |
Physical Dimensions (Inches)
S-102A | 19 W x 1.75 H x 8.5 D, EIA rack mounting |